# Conveyor not responding to Analog speed **URL:** \ **Category:** Support\ **Created:** [March 7, 2025, 2:52pm UTC](https://community.factoryio.com/t/conveyor-not-responding-to-analog-speed/3804 "2025-03-07T14:52:10Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![mustafa\_attwan](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@mustafa\_attwan](https://community.factoryio.com/u/mustafa_attwan)\ **Post date:** [March 7, 2025, 2:52pm UTC](https://community.factoryio.com/t/conveyor-not-responding-to-analog-speed/3804/1 "2025-03-07T14:52:10Z")
I try to control the conveyor speed with the Analog setting where I have a Potmeter (input=0-10v) and a digital display (output=showing the Potmeter value) The display works prefectly, but the Potmeter when adjusted it just goes to max speed which is 10 and when going between 0.1 to 10 it’s only max speed that FactoryIO reads on conveyor. ![Screenshot 2025-03-07 094804](https://europe1.discourse-cdn.com/flex017/uploads/factoryio/original/1X/8c5f5dec184f5d99d67c60ac5d556e9f8b60b75c.jpeg) ---
**Author:** ![janbumer1](https://dub1.discourse-cdn.com/flex017/user_avatar/community.factoryio.com/janbumer1/32/60_2.png) [@janbumer1](https://community.factoryio.com/u/janbumer1)\ **Post date:** [March 11, 2025, 6:26pm UTC](https://community.factoryio.com/t/conveyor-not-responding-to-analog-speed/3804/2 "2025-03-11T18:26:39Z")
How does your code look? How did you make the connection between the conveyor and the potentiometer? ---
**Author:** ![mustafa\_attwan](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@mustafa\_attwan](https://community.factoryio.com/u/mustafa_attwan)\ **Post date:** [March 12, 2025, 3:47pm UTC](https://community.factoryio.com/t/conveyor-not-responding-to-analog-speed/3804/3 "2025-03-12T15:47:04Z")
PLCSIM using s71200 simulator