# Driver Connection To PLCSIMV19

**URL:** <https://community.factoryio.com/t/driver-connection-to-plcsimv19/3134>\
**Category:** Drivers\
**Created:** [August 19, 2024, 2:16am UTC](https://community.factoryio.com/t/driver-connection-to-plcsimv19/3134 "2024-08-19T02:16:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![difarilukman3](https://avatars.discourse-cdn.com/v4/letter/d/e480ec/32.png) [@difarilukman3](https://community.factoryio.com/u/difarilukman3)\
**Post date:** [August 19, 2024, 2:16am UTC](https://community.factoryio.com/t/driver-connection-to-plcsimv19/3134/1 "2024-08-19T02:16:50Z")

</div>

![image](https://europe1.discourse-cdn.com/flex017/uploads/factoryio/original/1X/f69585863c44eba82c3de8f24239cf24550dba29.jpeg)

Hello everyone, I’m just confused about the driver connection between Tia Portal and Factory I/O. Here I made a program for sorting boxes based on the height of the Tia Portal, everything went well until I connected the PLCSIM driver to the factory I/O. it looks connected but I still can’t run the control program from the conveyor via factory i/o. The tag on the factory I/O should light up after connecting but it doesn’t. does anyone have the same problem or can help me?

---

<div class="post-metadata">

**Author:** ![adriana.silva](https://dub1.discourse-cdn.com/flex017/user_avatar/community.factoryio.com/adriana.silva/32/752_2.png) [@adriana.silva](https://community.factoryio.com/u/adriana.silva)\
**Post date:** [August 26, 2024, 9:17am UTC](https://community.factoryio.com/t/driver-connection-to-plcsimv19/3134/2 "2024-08-26T09:17:37Z")

</div>

Hello @difarilukman3, and welcome to our forum!

Have you been able to get it working?  
If not, could you share more screenshots or give some more information about your project?  
In the image you shared everything seems to be ok, but more info would be helpful.