# Factory I/O drivers interface with the Siemens LOGO! PLC

**URL:** <https://community.factoryio.com/t/factory-i-o-drivers-interface-with-the-siemens-logo-plc/2217>\
**Category:** Support\
**Created:** [July 5, 2023, 1:02pm UTC](https://community.factoryio.com/t/factory-i-o-drivers-interface-with-the-siemens-logo-plc/2217 "2023-07-05T13:02:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Skynet](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@Skynet](https://community.factoryio.com/u/Skynet)\
**Post date:** [July 5, 2023, 1:02pm UTC](https://community.factoryio.com/t/factory-i-o-drivers-interface-with-the-siemens-logo-plc/2217/1 "2023-07-05T13:02:55Z")

</div>

How does Factory I/O drivers interface with the Siemens LOGO! PLC without hardware. I am unable to connect the two together in simulation mode.  
Regards

---

<div class="post-metadata">

**Author:** ![brunovgr](https://dub1.discourse-cdn.com/flex017/user_avatar/community.factoryio.com/brunovgr/32/12_2.png) [@brunovgr](https://community.factoryio.com/u/brunovgr)\
**Post date:** [July 12, 2023, 10:08am UTC](https://community.factoryio.com/t/factory-i-o-drivers-interface-with-the-siemens-logo-plc/2217/2 "2023-07-12T10:08:15Z")

</div>

@Skynet

Are you trying to connect to a Siemens LOGO! PLC or to LOGO! Software?

You can connect through Ethernet to a Siemens LOGO! PLC, see more here: [Siemens LOGO! - FACTORY I/O](https://docs.factoryio.com/manual/drivers/logo/)

LOGO! Software is a closed application and cannot be used directly with Factory I/O.

---

<div class="post-metadata">

**Author:** ![Skynet](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@Skynet](https://community.factoryio.com/u/Skynet)\
**Post date:** [July 13, 2023, 8:59am UTC](https://community.factoryio.com/t/factory-i-o-drivers-interface-with-the-siemens-logo-plc/2217/3 "2023-07-13T08:59:43Z")

</div>

It is for the Siemens LogoSoft software. I was trying to connect Factory IO to the software but battled alot