# Factory IO to FluidSim
**URL:** https://community.factoryio.com/t/factory-io-to-fluidsim/223
**Category:** Uncategorized
**Created:** [May 13, 2020, 10:29am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223 "2020-05-13T10:29:35Z")
**Posts on this page:** 10
**Page:** 1
### Author:  [@jmarti64](https://community.factoryio.com/u/jmarti64)
#### Post date: [May 13, 2020, 10:29am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/1 "2020-05-13T10:29:35Z")
I made a video about to conect FluidSim to Factory IO
[ ](https://www.youtube.com/watch?v=usDuRt0EEzE)
---
### Author:  [@janbumer1](https://community.factoryio.com/u/janbumer1)
#### Post date: [June 17, 2020, 11:52am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/2 "2020-06-17T11:52:53Z")
Nice one! Didn’t even know this was possible!
Now we only need Process I/O with tanks, valves and pumps. @brunovgr 😉
---
### Author:  [@wayneschaefer](https://community.factoryio.com/u/wayneschaefer)
#### Post date: [June 17, 2020, 2:30pm UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/3 "2020-06-17T14:30:13Z")
Thanks for the video. I watched most with translation to English and found it understandable. I really need to play more with OPC … nice that you got it to work.
---
### Author:  [@paul.murray](https://community.factoryio.com/u/paul.murray)
#### Post date: [January 26, 2021, 10:43pm UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/4 "2021-01-26T22:43:24Z")
How did you get pneumatic actuators? I have the ultimate edition but these do not exist?
---
### Author:  [@theophile.umuhire](https://community.factoryio.com/u/theophile.umuhire)
#### Post date: [March 16, 2021, 1:39pm UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/5 "2021-03-16T13:39:22Z")
Hello,
Thank you for this video.
But I still have a probleme with the OPC Client DA/UA.
When I select FestoDidactic.EzOPC.1 as server.
I have only the representation of the bytes and not each bit (print screen in attachement).
How can I configurate the OPC Client DA/UA to have each bit visible in order to assign the sensors and actuators?
---
### Author:  [@janbumer1](https://community.factoryio.com/u/janbumer1)
#### Post date: [May 17, 2021, 9:38am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/6 "2021-05-17T09:38:22Z")
You mean the [Pusher](https://docs.factoryio.com/manual/parts/light-load/#pusher)?
PS. Sorry for the late reply.
---
### Author:  [@janbumer1](https://community.factoryio.com/u/janbumer1)
#### Post date: [May 17, 2021, 9:55am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/7 "2021-05-17T09:55:23Z")
Afaik it depends on the OPC server if you can address single bits or not. But I don’t work enough with OPC to tell you more.
---
### Author:  [@brunovgr](https://community.factoryio.com/u/brunovgr)
#### Post date: [May 18, 2021, 11:12am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/8 "2021-05-18T11:12:45Z")
@janbumer1 Yes, you are right. @theophile.umuhire You will have to configure Bool items in the OPC server. Factory I/O just browses the OPC server address space and retrieves all items that go through the filters.
Unfortunately, I don’t have access to that OPC server in our labs in order to investigate this further.
---
### Author:  [@jmmartinez](https://community.factoryio.com/u/jmmartinez)
#### Post date: [August 21, 2023, 7:37am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/9 "2023-08-21T07:37:14Z")
Hi @theophile.umuhire @brunovgr , did you solve the problem? the same happens to me
---
### Author:  [@tokis\_andersson](https://community.factoryio.com/u/tokis_andersson)
#### Post date: [September 19, 2023, 8:53am UTC](https://community.factoryio.com/t/factory-io-to-fluidsim/223/10 "2023-09-19T08:53:35Z")
Does this work with FluidSim v3.6?