# GX Works2 Delay Problem

**URL:** <https://community.factoryio.com/t/gx-works2-delay-problem/953>\
**Category:** Support\
**Created:** [July 15, 2021, 11:37am UTC](https://community.factoryio.com/t/gx-works2-delay-problem/953 "2021-07-15T11:37:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wogh44](https://avatars.discourse-cdn.com/v4/letter/w/b782af/32.png) [@wogh44](https://community.factoryio.com/u/wogh44)\
**Post date:** [July 15, 2021, 11:37am UTC](https://community.factoryio.com/t/gx-works2-delay-problem/953/1 "2021-07-15T11:37:28Z")

</div>

When the sensor operates in Factory IO, there is a delay of about 0.5 seconds when receiving from Gx Works2. Is there a solution?

---

<div class="post-metadata">

**Author:** ![brunovgr](https://dub1.discourse-cdn.com/flex017/user_avatar/community.factoryio.com/brunovgr/32/12_2.png) [@brunovgr](https://community.factoryio.com/u/brunovgr)\
**Post date:** [July 16, 2021, 1:11pm UTC](https://community.factoryio.com/t/gx-works2-delay-problem/953/2 "2021-07-16T13:11:34Z")

</div>

Hi @wogh44,

If you are using the OPC driver you should set the update rate of the OPC server, preferably, to 10ms. I have never used Gx Works2 but most servers have this option.