# I want to use delta plc dvp communication with pc
**URL:** https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370
**Category:** Uncategorized
**Created:** [September 15, 2023, 8:18am UTC](https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370 "2023-09-15T08:18:41Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@soun\_85](https://community.factoryio.com/u/soun_85)
#### Post date: [September 15, 2023, 8:18am UTC](https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370/1 "2023-09-15T08:18:41Z")
hello i want to ask about using delta plc communication with pc can this factory io use with delta plc
---
### Author:  [@brunovgr](https://community.factoryio.com/u/brunovgr)
#### Post date: [September 20, 2023, 7:34am UTC](https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370/2 "2023-09-20T07:34:19Z")
Hi @soun_85,
Modbus TCP or OPC UA are the best options for using Delta PLC with Factory I/O. See more about Factory I/O drivers here: [I/O Drivers - FACTORY I/O](https://docs.factoryio.com/manual/drivers/)
---
### Author:  [@murtihu](https://community.factoryio.com/u/murtihu)
#### Post date: [August 7, 2025, 3:36am UTC](https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370/3 "2025-08-07T03:36:29Z")
For some reason, I cannot get this to work with the Delta PLC Simulator. No program upload is needed
Steps to reproduce:
→ Download COMMGR and run DVP simulator (free).
→ Open FactoryIO and run TCP client
→ Try to read and write to address 2049 (which should be M0? the first bit register)
→ Nothing happens, even though the PLC is connected
---
### Author:  [@adriana.silva](https://community.factoryio.com/u/adriana.silva)
#### Post date: [August 21, 2025, 10:59am UTC](https://community.factoryio.com/t/i-want-to-use-delta-plc-dvp-communication-with-pc/2370/4 "2025-08-21T10:59:20Z")
Hi, @murtihu,
Did you manage to solve your issue?