# OPC Client DA/UA No items/nodes found on server
**URL:** https://community.factoryio.com/t/opc-client-da-ua-no-items-nodes-found-on-server/3749
**Category:** Support
**Created:** [February 23, 2025, 2:34am UTC](https://community.factoryio.com/t/opc-client-da-ua-no-items-nodes-found-on-server/3749 "2025-02-23T02:34:57Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@peterson.senha](https://community.factoryio.com/u/peterson.senha)
#### Post date: [February 23, 2025, 2:34am UTC](https://community.factoryio.com/t/opc-client-da-ua-no-items-nodes-found-on-server/3749/1 "2025-02-23T02:34:57Z")
Hello There!
When I go to search for the factory io nodes, I can’t find all the nodes that I configured via global variables.
My global variables in Codesys:
OPC\_ESTEIRA: BOOL;
OPC\_RUNNING: BOOL;
OPC\_SENSOR: BOOL;
But when I go to look in FactoryIO, it doesn’t show me these variables!
OPC Client DA/UA
No items/nodes found on server ‘OPCUAServer@DESKTOP-8C95251 (UA)’ using filters: Start with: ‘OPC’ Contains: “”
Kind regards and thanks!
---
### Author:  [@janbumer1](https://community.factoryio.com/u/janbumer1)
#### Post date: [February 24, 2025, 9:53am UTC](https://community.factoryio.com/t/opc-client-da-ua-no-items-nodes-found-on-server/3749/2 "2025-02-24T09:53:18Z")
Can you try a tool like UaExpert or similar to connect to your OPC server and browse your nodes to see if the problem lies in the driver settings in Factory I/O?
Maybe your filter is wrong? Have you tried without the “Starts with” filter?
---
### Author:  [@jimmy.loyens](https://community.factoryio.com/u/jimmy.loyens)
#### Post date: [September 25, 2025, 12:26pm UTC](https://community.factoryio.com/t/opc-client-da-ua-no-items-nodes-found-on-server/3749/3 "2025-09-25T12:26:20Z")
Hello, I’m having the same problem. When i log in to the OPC UA server using a test client, I can see my OPC tags coming from Beckhoff plc. I can change values of the OPC tags in the plc and on the server and see state change on other side. So OPC comms is ok. But when i connect the factory io driver to the OPC UA server and browse for available nodes, i can’t find any node. Even though i can see and manipulate the tags from the server and from the plc. Any ideas?