# Will this Siemens LOGO work with Factory IO

**URL:** <https://community.factoryio.com/t/will-this-siemens-logo-work-with-factory-io/293>\
**Category:** Support\
**Created:** [June 15, 2020, 8:04pm UTC](https://community.factoryio.com/t/will-this-siemens-logo-work-with-factory-io/293 "2020-06-15T20:04:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![trell](https://avatars.discourse-cdn.com/v4/letter/t/cc9497/32.png) [@trell](https://community.factoryio.com/u/trell)\
**Post date:** [June 15, 2020, 8:04pm UTC](https://community.factoryio.com/t/will-this-siemens-logo-work-with-factory-io/293/1 "2020-06-15T20:04:41Z")

</div>

Looking at the kit to get started in PLCs but wanted to know if this kit will work with the Factory IO  
Starter Kit 230RCE Siemens LOGO! 6ED10573BA030AA8  
[https://www.automation24.com/starter-kit-230rce-siemens-logo-6ed10573ba030aa8](https://www.automation24.com/starter-kit-230rce-siemens-logo-6ed10573ba030aa8)  
The setup docs says “Note that only **0BA7** and **0BA8** are supported” and I can’t seem to find a PLC with those number.  
Thanks for any help  
Trell

---

<div class="post-metadata">

**Author:** ![geert.vangrieken](https://avatars.discourse-cdn.com/v4/letter/g/d9b06d/32.png) [@geert.vangrieken](https://community.factoryio.com/u/geert.vangrieken)\
**Post date:** [June 25, 2020, 10:50am UTC](https://community.factoryio.com/t/will-this-siemens-logo-work-with-factory-io/293/2 "2020-06-25T10:50:32Z")

</div>

Hi Trell,

You can find LOGO! 0BA8 on the Siemens educational site: [https://www.automation.siemens.com/sce-static/trainer-packages/sce-guide-trainer-packages-without-prices-en.pdf](https://www.automation.siemens.com/sce-static/trainer-packages/sce-guide-trainer-packages-without-prices-en.pdf) (Look at page 36 of this document).

You have to contact your local Siemens office (or reseller) for prices.