Contribution to the factory io project 51 (artificial vision V3)

Hello;

This project, due to its characteristics and the use of Factory IO components, has the following characteristics:

If we remove the wheels and add aligners, on the one hand, the scene becomes very large, and on the other, the object is not surrounded by a black background. Therefore, there is no other option than the wheel. This is why, on some occasions (not all), the box doesn’t follow the path it should. Even so, the project is very complete for students to understand artificial vision.

Now, I’m going to try removing two outputs and leaving only five, with the idea of ​​further separating the zones using aligners. Of course, I’ll share the scene with you. For now, I’ll leave this one here so that if anyone dares to try it, they can try it.

Regards

Hello,

A good programmer must be able to troubleshoot the machine’s setup, then know how to program it, and finally make the necessary adjustments so everything works correctly.

This case is illustrative of this, since FACTORY IO isn’t perfect, so these imperfections must be corrected with other methods of setup or even code.

Quite a challenge for students, although I will say that just creating the scene is more than 50% of the work they’re doing. Creating and adjusting a scene is much more complex than programming it, I can tell you that, as I know a lot about that.

Regards