Factory io v2.4 will not start

Support
1

I am using VMware Workstation v16.24. I checked the 3d acceleration, increased Ram to 16GB but it will still not start. Here is the log file below. please help

Mono path[0] = ‘C:/Program Files (x86)/Real Games/Factory IO/Factory IO_Data/Managed’
Mono config path = ‘C:/Program Files (x86)/Real Games/Factory IO/MonoBleedingEdge/etc’
Initialize engine version: 2021.3.7f1 (24e8595d6d43)
[Subsystems] Discovering subsystems at path C:/Program Files (x86)/Real Games/Factory IO/Factory IO_Data/UnitySubsystems
GfxDevice: creating device client; threaded=1; jobified=1
Direct3D:
Version: Direct3D 11.0 [level 10.0]
Renderer: VMware SVGA 3D (ID=0x405)
Vendor: VMWare
VRAM: 128 MB
Driver: 8.17.3.5
Begin MonoManager ReloadAssembly

  • Completed reload, in 0.199 seconds
    Initializing input.

XInput1_3.dll not found. Trying XInput9_1_0.dll instead…
Input initialized.

Initialized touch support.

UnloadTime: 0.956600 ms

1 Like
2

Hi.
The log seems fine as nothing looks out of the ordinary.
Please check if a crash report was generated and can be found at C:/Users/<username>/AppData/Local/Temp/Real Games/Factory IO/Crashes. If found, please send it back to through the contact form.
You should also check that you have installed the latest drivers for your graphics device on the VM host.