In the docs there it is not specified if there is support for S7-PLCSIM V20 and if the template also works for TIA Portal V20. Is this already possible?
If S7-PLCSIM V20 is not supported i would like to know if you can use S7-PLCSIM V19 with TIA Portal V20?
Hello @splatmoon,
Welcome to the forum!
We have run some tests with TIAPortal V20 and PLCSIM V20. Factory I/O will connect to PLCSIM if you use S7-1200, but currently, it can’t connect to S7-1500. We are looking into this issue and will update you once we have more information.
I’ve also tested TIAPortal V20 with PLCSIM V19 and it worked perfectly so I believe you can use it. With PLCSIM V19 you can use either S7-1200 or S7-1500.
Just note that to use S7-PLCSIM with Factory I/O you need the templates we offer in our documentation. You can find them here: Setting up S7-PLCSIM V13-19 - FACTORY I/O
Hi adriana.silva,
I tried to use TIA V20 and the latest v19 template.
When I try to connect to the PLC Sim i got the Error:
Can you help me please ?
BR, Arthur
Hello @arthurkutnogorski, welcome to the forum!
There seems to be an error with the CPU configuration. You probably have to update it. To do so, in the Project Tree on the left side of the screen, select Device Configuration. Right-click on the PLC and select Change device
Choose the CPU you want to use and select the most recent version.
Once you click OK, a window will appear to configure the PLC security settings.
Set up a password and note it down, as you’ll probably need it when you try to download to the PLC or SoftPLC. Make sure to disable access control in the PLC access protection section so that anonymous login is allowed.
Now you should be able to download to PLCSIM.
I hope this helps. Please let me know if the issue persists.